UK DJI ACBEL ADE019 17.5V 5.7A Power Adapter -- ACBEL17.5V5.7A100W-7.4x5.0mm

Do not use low quality ac adapter?

Why choose this ACBEL17.5V5.7A100W-7.4x5.0mm original ac adapter?

UK DJI ACBEL ADE019 17.5V 5.7A Power Adapter -- ACBEL17.5V5.7A100W-7.4x5.0mm

• This ac adapter have short circuit protection, overheat protection circuit
• This ac adapter have very clean output, which can protect cpu, hard disk,video card and all the device.
• This ac adapter have a very good heat dispersion, that's means it is very safe when you use it for a long time.
• This genuine laptop ac adapter will longer your laptop battery life.
• It is a genuine ac adapter.

How to choose this ACBEL17.5V5.7A100W-7.4x5.0mm

1. Your original adapter output volt is 17.5V.
2. Your original adapter output Current is 5.7A.
3. Make sure its DC tips size is the same as your original.

The Reason Why AC Adapters Get Hot?

1. Your machine use external alternating current (AC) adapter, which converts high voltage alternating current into low voltage, stable current. Adapters of this type can be too hot to be touched.
2. The AC adapter include two circuits to ensure a constant power supply device adapted to the computer or others. A transformer reduces the voltage, but a regulator provides a constant electricity, without "noise". These circuits use a small amount of electricity and generate a small amount of heat. The AC adapters usually feels a little warm. They can be warmer when the device is using a lot of electricity, for example whether it is running and charging the battery. There is no reason to worry about an adapter if it is too hot to touch comfortably.
3. Adapters sometimes overheated because the circuitry in them, such as the regulator, are malfunctioning. If the part is bad, it can produce excessive heat and must be replaced. The device itself can sometimes take too much current from the adapter, increasing the current passing through it, so it will be too hot.
4. AC adapters are based on air passing over them to dissipate heat and cool them. If the adapter is covered, such as a blanket or rug, the excess heat is trapped and then the adapter will overheat. Ensure to keep the adapter from obstacles. If ventilation is adequate, will remain at a moderate temperature.
5. If you use a low quality replacement ac adapter, It may not have a heat-dissipating aluminum plate inside.
6. If your adapter has only recently become very hot, it may be malfunctioning and you need to change it to avoid damage to the internal components of the machine.