UK CHICONY 19V 3.42A 65W Power Supply for Gateway MS2285 MD2614u MS2274 NV78 A11-065N1A CPA09-A065N1 charger -- CHICONY19V3.42A65W-5.5x1.7mm

This ac adapter CHICONY19V3.42A65W-5.5x1.7mm may be fit for the following models ( Customer offered ):
25WAK, V3-571-6822, V5-571G, Galago Pro, V5-571G-53338G75, 13-hr-965, A11-065N1A, Aspire A515-51G, 57426977, ASPIRE V5 471PG, Aspire, Acer Aspire 5253, E5-523g-nv, P4vc0, Aspire V5-573, N17c4, AXER TIMELINE U, Acer P4vc0, E5-523G-95NV, MS2384, Packardbell

Do not use low quality ac adapter?

Why choose this UK CHICONY 19V 3.42A 65W Power Supply for Gateway MS2285 MD2614u MS2274 NV78 A11-065N1A CPA09-A065N1 charger -- CHICONY19V3.42A65W-5.5x1.7mm

UK CHICONY 19V 3.42A 65W Power Supply for Gateway MS2285 MD2614u MS2274 NV78 A11-065N1A CPA09-A065N1 charger -- CHICONY19V3.42A65W-5.5x1.7mm

• This ac adapter have short circuit protection, overheat protection circuit
• This ac adapter have very clean output, which can protect cpu, hard disk,video card and all the device.
• This ac adapter have a very good heat dispersion, that's means it is very safe when you use it for a long time.
• This genuine laptop ac adapter will longer your laptop battery life.
• It is a genuine ac adapter.

How to choose this UK CHICONY 19V 3.42A 65W Power Supply for Gateway MS2285 MD2614u MS2274 NV78 A11-065N1A CPA09-A065N1 charger -- CHICONY19V3.42A65W-5.5x1.7mm

1. Your original adapter output volt is 19V.
2. Your original adapter output Current is 3.42A.
3. Make sure its DC tips size is the same as your original.

The Reason Why 19V 3.42A AC Adapters Get Hot?

1. Your machine use external alternating current (AC) adapter, which converts high voltage alternating current into low voltage, stable current. Adapters of this type can be too hot to be touched.
2. The 19V 3.42A AC adapter include two circuits to ensure a constant power supply device adapted to the computer or others. A transformer reduces the voltage, but a regulator provides a constant electricity, without "noise". These circuits use a small amount of electricity and generate a small amount of heat. The 19V 3.42A AC adapters usually feels a little warm. They can be warmer when the device is using a lot of electricity, for example whether it is running and charging the battery. There is no reason to worry about an adapter if it is too hot to touch comfortably.
3. Adapters sometimes overheated because the circuitry in them, such as the regulator, are malfunctioning. If the part is bad, it can produce excessive heat and must be replaced. The device itself can sometimes take too much current from the adapter, increasing the current passing through it, so it will be too hot.
4. 19V 3.42A AC adapters are based on air passing over them to dissipate heat and cool them. If the adapter is covered, such as a blanket or rug, the excess heat is trapped and then the adapter will overheat. Ensure to keep the adapter from obstacles. If ventilation is adequate, will remain at a moderate temperature.
5. If you use a low quality replacement 19V 3.42A ac adapter, It may not have a heat-dissipating aluminum plate inside.
6. If your 19V 3.42A adapter has only recently become very hot, it may be malfunctioning and you need to change it to avoid damage to the internal components of the machine.
7. The original 19V 3.42A ac adapter is usually not easy to heat, because it is designed with good heat dissipation performance in mind, And it has passed many safety and quality certifications.